Instruction manual

Programming
93
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
?AUDMIC_LIMITER_ATTACK Requests the duration of the attack phase while limiting from the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_LIMITER_ATTACK'"
Example:
SEND_COMMAND MIC_1, "'?AUDMIC_LIMITER_ATTACK'"
Returns a string of the form:
?AUDMIC_LIMITER_ ATTACK=< value>
AUDMIC_LIMITER_ATTACK Sets the duration of the attack phase while limiting for the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_LIMITER_ATTACK-<attack>'"
Variable:
attack = 1 to 2000
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_LIMITER_ATTACK-200'"
Sets the limiter attack for the microphone port (#1 based on the D:P:S) to
200.
?AUDMIC_LIMITER_RELEASE Requests the duration of the release phase while limiting from the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_LIMITER_RELEASE'"
Example:
SEND_COMMAND MIC_1, "'?AUDMIC_LIMITER_RELEASE'"
Returns a string of the form:
?AUDMIC_LIMITER_ RELEASE=< release>
AUDMIC_LIMITER_RELEASE Sets the duration of the release phase while limiting for the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_LIMITER_RELEASE-<release>'"
Variable:
release = 10 to 5000
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_LIMITER_RELEASE-200'"
Sets the limiter release for the microphone port (#1 based on the D:P:S) to
200.
?AUDMIC_LIMITER_THRESH Requests the duration of the threshold phase while limiting from the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_LIMITER_THRESH'"
Example:
SEND_COMMAND MIC_1, "'?AUDMIC_LIMITER_THRESH'"
Returns a string of the form:
?AUDMIC_LIMITER_ THRESH=< thresh>