Instruction manual

Programming
90
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
AUDMIC_EQ_Q Sets the quality factor (Q) for a specific band of the equalizer for the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_Q-<band>,<factor>'"
Variables:
band = 1 to 3 on the microphone inputs.
factor = range depends on filter type (set by AUDMIC_EQ_FT, see page 88)
Bell: range is 0.1 - 20.0
Band Pass:range is 0.1 - 20.0
Band Stop:range is 0.1 - 20.0
High Pass:range is 0.5 - 1.4
Low Pass:range is 0.5 - 1.4
Treble Shelf:range is 0.5 - 1.0
Bass Shelf:range is 0.5 - 1.0
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_Q-1,1'"
Sets the quality factor for the first band of the equalizer for the selected
microphone port (#1 based on D:P:S) to 1.
?AUDMIC_GAIN Requests the gain setting for the specified microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GAIN'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_GAIN'"
Returns a COMMAND string of the form:
AUDMIC_GAIN-<gain>
AUDMIC_GAIN Sets the gain of the specified microphone port to <gain>.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GAIN-<gain>'"
Variable:
gain = -24 to 24 in dB
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GAIN-3'"
Sets the gain for the microphone port (#1 based on the D:P:S) to 3dB.
?AUDMIC_GATING Requests the gating setting for the specified microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GATING'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_GATING'"
Returns a COMMAND string of the form:
AUDMIC_GATING-<setting>
AUDMIC_GATING Sets the gating setting for the specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GATING-<setting>'"
Variable:
setting = off, low, medium, high, custom
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GATING-low'"
Sets the gating for the microphone port (#1 based on D:P:S) to low.