Instruction manual

Programming
89
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
AUDMIC_EQ_FT Sets the filter type on a specific band of the equalizer for the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_FT-<band>,<type>'"
Variables:
band = 1..3 on the microphone inputs.
type = bell, band pass, band stop, high pass, low pass, treble shelf,
bass shelf
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_EQ_FT-1,band pass'"
Sets the filter type for the first band of the equalizer for the selected
microphone port (#1 based on D:P:S) to band pass.
?AUDMIC_EQ_GAIN Requests the gain on the microphone equalizer setting of band <band> for the
specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_GAIN-<band>'"
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_GAIN-1'"
Returns a COMMAND string of the form:
AUDMIC_EQ_GAIN-<band>,<value>.
AUDMIC_EQ_GAIN Sets the gain on the microphone equalizer band <band> on the specified
microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_GAIN-<band>,<value>'"
Variables:
band = 1..3 on the microphone inputs.
value = -12..12. The units are in dB.
Example:
SEND_COMMAND MIC_1,"'AUDMIC_EQ_GAIN-1,8'"
Sets the gain on microphone band #1 of microphone 1 equalizer to 8.
SEND_COMMAND MIC_2,"'AUDMIC_EQ_GAIN-3,10'"
Sets the gain on microphone band #3 of microphone 2 equalizer to 10.
?AUDMIC_EQ_Q Requests the quality factor (Q) for a specific band of the equalizer for the
specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_Q-<band>'"
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_Q-1'"
Returns a COMMAND string of the form:
AUDMIC_EQ_Q-<band>,<value>.