Corporation Distribution Matrix Instruction Manual

APWeb – Initial Setup by Network Admin
69
Octaire Instruction Manual
Overview of the Admin Home Page
APWeb’s Admin Home page has links for complete site access, while the links on the user’s Home page
are limited to control access. The Admin Home page displays information on the system’s routing levels
(referred to as virtual matrices or VMs on APWeb) and the number of currently defined macros (defined
in APWeb). It also displays information regarding the discovery of hardware devices during bootup if
this feature is enabled.
The links on the left side of the Home page access the pages listed below:
FIG. 34 Admin Home page
Link Page Function
Home Home The main page in the APWeb site
Controller XBar Controller The controller interface for executing and disconnecting switches
(page 82) and adjusting audio (page 83)
Execute Macro Execute Macro For executing macros (page 85)
Create Macro Create/Edit Macro For creating or deleting macros (page 77)
Define VM Define VM (manual
configuration)
For manually defining or deleting routing levels (page 78)
Configuration APWeb Configuration For specifying site settings, such as the IP address (page 70) and
the site name (page 74), and for enabling features
Diagnostics Diagnostics For sending a test BCS command (page 73) or launching a Telnet
session to enter BCS commands (page 81)
Administration APWeb Administration For accessing Account Profile (user names and passwords) and Site
Security information (page 71); it also includes the enable/disable
services preferences (page 74)
Contact Info Contact Information Displays the AMX address, phone and fax numbers, and website link
Click logo for AMX Website
APWeb version number
Number of macros defined in APWeb
Current routing levels (VMs)
Links
Customizable site name
Bootup discovery information
(must be enabled)