Specifications

6408 216th St. SW | Mountlake Terrace, WA 98043 | USA | Tel: [phone] | Fax: [phone]
5
Page
SymNet Application: Audio DistributionSymNet Application: Audio Distribution
G Audio Distribution Design
Using SymNet Designer, open the first example Site File.
Then, double-click on the Express 12x4 Cobra in the Con-
figuration Screen to view the Design Screen. Audio enters
the Analog Ins, feeding the initial gain stage. Proper gain
staging is a must for a well-behaved system and signal
levels should average around -20 dBFS on the meters.
! Mix Super-module: Next, the audio routes through the Mix
Super-module. This stage provides four bands of EQ for each
microphone input and the main faders for all channels. All
twelve channels exit the Super-module twice; once pre fade,
or before the main faders, and once post fade, or after the
main faders. A Mix output provides a single channel of post
fader mixed audio.
@ Paging Super-module: This Super-module contains the
paging logic for each zone. For more information on Sym-
Net’s paging technologies, please review the Public Address
application.
# Select Matrix Super-module: This Super-module provides
the ability to select any of the microphone or BGM inputs as
program material. Paging microphones are not available as
a selectable source. Two outputs for each zone feed the Zone
Routing Super-module.
$ Zone 1-4 Super-modules: These Super-modules create a
mix for the zone output. Each Super-module has two pro-
gram inputs, an aux mix input, and a page microphone input.
Zones 1 and 2, detailed later, also feature an SPL Computer.
% Output Super-module: Fed by each of the Zone Super-
modules, this Super-module provides a matrix module which
allows custom routing of any zone to any output. Loud-
speaker Management modules, Gain and Metering complete
this Super-module.
^ Aux Mix Matrix: Additionally, there is a Matrix Mixer-
module that follows the Mix Super-module which is used to
create unique mixes of the inputs for each zone.
SymNet Designer Site File