User Guide

Using the Design XPress Project Wizard
46
Design XPress Programmer’s Guide
CD Titles dialog
If a CD Changer has been selected on the Audio Sources dialog, the CD Titles dialog (FIG. 19) will
be shown, with the CD Changer (as specified in the Audio Sources dialog) indicated in the title bar.
Use the CD Tiles screen to add up to 400 CD titles to appear in the CD Titles list.
Adding CD titles to Design XPress can be done in two ways; manually adding each CD title or
reading the CD title from a CD placed in the CD ROM drive of your computer. The following is a
list of fields in the CD Titles dialog and their descriptions:
FIG. 19 CD Titles dialog
CD Titles dialog
Group Tabs: The tabs along the top of this page represent the discs in the CD changer,
separated into sets of 25 (up to 400). The number of CDs in the CD changer
is based on the Changer Size entry in the Audio Sources dialog. Click on
each tab to see the names for those CD locations in the changer.
Disc Display Text: Select the disc title or enter the title in the appropriate field. The numbers
correspond to the disc number. The contents of this list are based on the CD
titles library, accessible via the CD Titles Maintenance dialog.
Clear All Displayed Items: Click this button to clear all the CD titles in the selected group tab.
Manually add Disc to data store: Use the fields to manually add a CD title. Type the artist name and the CD
title in the appropriate fields.
Setting to retrieve CD data from
freedb.org:
Select the CD drive from the drop-down list to retrieve CD information for.
To add a CD title by reading the information from a CD, go to the CD ROM
drive to retrieve CD information from section and select the appropriate drive
location. Then, select the (...) button next to the disc number you wish to title.
If the disc has never been read before, Design XPress will attempt to get the
data from freeDB.org.
Note: To prevent the CD from playing when it is inserted, hold down the shift
key on the keyboard while loading the CD.