User`s guide

KwikNet System Configuration

DAK

Ethernet IP Address Definition

You must provide a network IP address for each prebuilt network which your application

supports. The network IP address for each prebuilt network is defined using the Networks

property page. The layout of the window is shown below.

You can specify a network's IP address using this property page. Alternatively, you can

assign the IP address in your network startup hook, if one is provided. Of course, IP

addresses can also be assigned dynamically using DHCP, BOOTP or Auto IP.

If you intend to assign the network IP address at runtime, then you can enter 0.0.0.0 for

all of the address fields on this page.

Edit: IP Address

You must select the

Edit: IP Address radio button to define the network's IP address and

related parameters.