User`s guide

2
K
A
DAK
KwikNet Overview
Installation
KwikNet is delivered to you on a CD-ROM. During installation you will need your
KwikNet CD serial number and product installation key, both of which are recorded on a
label attached to the CD-ROM case. The CD serial number is also printed on the face of
the CD-ROM.
The CD serial number identifies your KwikNet CD-ROM. The product installation key
identifies the specific parts which you are entitled to install from the CD-ROM.
KwikNet is installed by running the InstallShield
®
SETUP.EXE program located in the root
directory of the CD-ROM. From the Windows Start, Run... menu, type D:\SETUP.EXE
(where D: is your CD-ROM drive letter) and press Enter. Alternatively, browse the root
directory of the CD-ROM and double click on the SETUP.EXE filename or icon.
The setup utility will lead you through the installation process. You may be requested to
identify the software development tools which you plan to use for development. If so,
only the tools specifically supported by KADAK will be listed.
The installation process will copy the product files into a directory of your choice on the
disk drive of your choice. KwikNet files will be installed in subdirectory KNTnnn where
the number nnn comes from the KADAK part number PNnnn-2 used to identify KwikNet.
Throughout all KwikNet manuals, the installation directory will be referred to as KNTnnn.
Note
The standard distribution of the Turbo Treck TCP/IP Stack
from Treck Inc., as delivered to you with KwikNet, must be
installed in a directory named TRECK.