User`s guide

KwikNet System Configuration
K
A
DAK
99
2.7 Modem Options
If a KwikNet network requires modem support, you must define the modem parameters
which govern its use. These modem parameters are edited using the Modem Options
Dialog which you access by selecting the Edit: Network radio button and then clicking on
the Modem Options... button. The layout of the dialog box is shown below.
Startup Hook
This parameter provides the name of an application function which will be called when
the KwikNet Modem Driver is being initialized. This function can modify the modem's
configuration parameters before the modem has been fully initialized. If your application
does not require a startup hook for this modem, leave this field empty. The modem
driver startup hook is described in Appendix A.3 of the
KwikNet Device Driver Technical
Reference Manual.