User`s guide

96
K
A
DAK
KwikNet System Configuration
PPP IP Address Definition
You must provide a network IP address for each prebuilt network which your application
supports. The network IP address for each prebuilt network is defined using the Networks
property page. The layout of the window is shown below.
You can specify a network's IP address using this property page. Alternatively, you can
assign the IP address in your network startup hook, if one is provided, or negotiate the IP
address with the network's PPP peer. KwikNet does not support the dynamic assignment
of an IP address for a PPP network using DHCP, BOOTP or Auto IP.
If you intend to assign or negotiate the network IP address at runtime, then you can enter
0.0.0.0 for all of the address fields on this page. For your convenience, all the options on
this page can also be edited on the more comprehensive PPP Options Dialog which you
access by selecting the
Edit: Network radio button and then clicking on the PPP Options...
button.