Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
Installing the Product
|
49
product_tibco_eclipse_lgpl_3.5.2.001 assembly that was previously
downloaded is stored.
Select the assembly and click Open.
15. Linux and Solaris Click Next. If you chose to download the assembly, a
screen displays the assembly download process.
16. The TIBCO Configuration Directory screen displays. The configuration
directory (CONFIG_HOME) stores BPM configuration information, for
example, the properties for Workspace and Openspace. Click Next to accept
the default location or Browse and select the directory where you want your
configuration information to be stored. Ensure that the selected directory is
not the configuration directory for another TIBCO installation environment.
17. The Pre-Install Summary screen displays. Verify the list of
products/components selected for install.
Note that the TIBCO Configuration Directory specifies a different default location
for the configuration directory than the actual location. For example,
c:\ProgramData\amx-bpm\tibco\cfgmgt when the actual location is
c:\ProgramData\amx-bpm\tibco\data.This is because the TIBCO
Configuration Tool specifies a different location for the configuration folder than
the TIBCO ActiveMatrix BPM installer. The TIBCO Configuration Tool will use
the location you have specified in the TIBCO ActiveMatrix BPM installer