Installation guide
TIBCO ActiveMatrix BPM Installation and Configuration
46
|
Chapter 4 Installation
Installing the Product
Install the product using one of the modes described in the sections:
• Installing in GUI mode on page 46
• Installing in Console mode on page 50
• Install in Silent mode on page 50
When installing the Administration or Runtime Host profiles in GUI mode, the
installer allows you to invoke the TIBCO Configuration Tool, a utility to create an
ActiveMatrix Administrator server, TIBCO Host instances, and a BPMNode node,
and package third-party drivers. If you are installing in console or silent mode
you must run TIBCO Configuration Tool after installation completes. See
Chapter 5, Creating and Configuring Runtime Objects for details.
Installing in GUI mode
1. Open the physical media or download the TIBCO ActiveMatrix BPM archive
file.
2. Extract the TIBCO ActiveMatrix BPM archive file to a temporary directory.
3. Navigate to the temporary directory.
4. If your machine will not be connected the Internet during installation, ensure
that the required software assemblies are downloaded and saved to either the
assemblies subdirectory of the temporary directory in step 2. on page 46 (the
preferred option to streamline installation) or to another temporary directory.
See Software Requirements on page 13 for details regarding the required
assemblies.
5. Run TIBCOUniversalInstaller. The Welcome screen displays.
6. Click Next. The License Agreement screen appears.
7. Review the terms of the license agreement and, if you agree to them, click I
accept the terms of the license agreement. Click Next to proceed with the
installation. If you do not agree to the terms of the license agreement, click
Cancel to exit from the installation process.
The Installation Profile Selection screen displays.
8. Select a profile on the left. The right pane displays the features selected by
default for the chosen profile.
To customize the features to be installed, check the Customize Installation
checkbox and check the checkboxes next to the features to be installed.