Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
8
|
Chapter 1 Introduction
Hardware Requirements
TIBCO recommends the following minimum server machine specification for all
platforms:
• Two 3GHz dual processors.
• 8 GB of virtual memory available for user applications
• 5 GB of free space on the local drive where you are installing TIBCO
ActiveMatrix BPM.
Supported Platforms
Refer to the product readme file for the supported operating system platforms
and versions and required patches.
Certified and Compatible Combinations
This section describes and lists the certified and compatible combinations of
operating systems and databases for TIBCO ActiveMatrix BPM.
Certified versions are a defined set of operating systems and database
combinations that have been extensively tested and validated by TIBCO.
Typically, every release of TIBCO ActiveMatrix BPM is certified against the most
common combinations being used by customers. In the process, specific versions
of LDAP servers, browsers, and other third party software are also certified.
See Certified Versions for a list of certified operating systems and database
combinations for the current release.
Compatible versions are the set of operating systems, databases, and other third
party software that:
• have been certified by TIBCO in one of the earlier releases, or
• are claimed to be compatible by the vendor.
In the event of a problem with a compatible software version, TIBCO will employ
best efforts to provide support on that software version. However, TIBCO may
request that you reproduce the problem on a certified version of the software.
This may mean that you potentially downgrade to an older software version (or
upgrade to a newer version) that does not exhibit the issue; ideally only on a
temporary basis.
See Compatible Versions for the list of compatible operating systems and
databases.