Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
184
|
Chapter 9 Upgrading Your System
Troubleshooting
When running the upgrade utility, if the script exits with an error on or before
upgrading all the components, depending on the error, it may be possible to
complete the upgrade process by running the individual commands rather than
running an upgrade all again. Following example scenarios describe the scripts to
be run when the upgrade scripts exits before completion.
Scenario 1
If you have run
upgrade all, and the script exits after upgrading TIBCO Host
but before upgrading TIBCO Administrator, you could run the following
commands in the order specified below:
1.
upgrade admin - to upgrade TIBCO Administrator
2. upgrade bpmnodes - to upgrade TIBCO ActiveMatrix BPM Node
3.
upgrade bpm - to upgrade TIBCO ActiveMatrixDatabase and TIBCO
ActiveMatrix Application
Scenario 2
If you have run
upgrade all, and the script exits after upgrading TIBCO
ActiveMatrix BPM Node but before upgrading TIBCO ActiveMatrix BPM
Database, you could run the following commands in the order specified below:
1.
upgrade bpm-database - to upgrade TIBCO ActiveMatrix BPM Database
2.
upgrade bpm-app - to upgrade TIBCO ActiveMatrix BPM Application
Scenario 3
After running
upgrade all, the logs show that the upgrade failed. However, the
TIBCO ActiveMatrix Administrator lists the newer version of the BPMNode,
indicating that the BPMNode has been upgraded successfully.
Sometimes, previously failed user application undeployments result in old
features or applications that cannot be removed in the final cleanup, and cause the
product upgrade to fail.