Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
Overview
|
173
Overview
Upgrading TIBCO ActiveMatrix BPM to 1.3.0 involves upgrading the runtime
objects: TIBCO ActiveMatrix BPM application (amx.bpm.app), BPMNode, TIBCO
Host instances, TIBCO ActiveMatrix Administrator servers, and TIBCO
ActiveMatrix BPM Database.
This chapter describes how to upgrade TIBCO ActiveMatrix BPM 1.2.0 runtime
objects to release 1.3.0. If your current installation is not 1.2.0, you must first
upgrade to release 1.2.0. Refer to the upgrade instructions provided in the TIBCO
ActiveMatrix BPM Installation and Configuration guide for release 1.2.0.
Upgrading a Distributed Component Implementation of TIBCO ActiveMatrix BPM
If you have a distributed component implementation of TIBCO ActiveMatrix
BPM, you must:
1. On each remote machine in the cluster that has TIBCO ActiveMatrix BPM
installed on it, you must upgrade the TIBCO Host.
Perform an upgrade as described in Performing an Upgrade of TIBCO
ActiveMatrix BPM on each of the machines in the cluster that have TIBCO
ActiveMatrix BPM installed on them.
Upgrade will fail if you have reconfigured the Administrator server in any of the
following ways since creating the server with TIBCO Configuration Tool:
• Deleted the initial superuser or changes the superuser password.
• Changed the port of the external HTTP connector or enabled or disabled SSL
for the connector.
On a machine that has TIBCO ActiveMatrix Administrator installed, you need
not upgrade the TIBCO Host separately as the TIBCO Host on this machine
will be upgraded when you upgrade the Administrator.
You must use the upgrade all command to perform the upgrade. See
Performing an Upgrade of TIBCO ActiveMatrix BPM on page 181 for details.