Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
168
|
Chapter 8 Configuring BPM in Silent Mode
a. Run the Configure Third-Party Driver wizard to register the JDBC drivers
for your TIBCO ActiveMatrix BPM database. From the Summary dialog:
—click Save to save the configuration information in the TIBCO
Configuration folder. The configuration information is stored in
\tct\tpclshells. See Running the TIBCO Configuration Tool on
page 97 for information on how to run the wizard.
—click Configure. You must click Configure as well as Save, otherwise
you will not be able to complete some of the dialogs when you run the
Create TIBCO ActiveMatrix BPM Server wizard as some of the fields
will be empty.
b. Run the Create TIBCO ActiveMatrix BPM Server wizard to create TIBCO
ActiveMatrix BPM; see Create TIBCO ActiveMatrix BPM Server Reference
on page 145 for details. From the Summary dialog:
—click Save. The TIBCO Configuration Tool saves the configuration
information in the TIBCO Configuration folder, for example
\tct\bpm.
—click Cancel to exit the wizard.
The location of the configuration information is used during the silent installation
of TIBCO ActiveMatrix BPM.
Machine 2: Install product in silent mode
1. Create the AMX BPM database, if it has not been created earlier.
2. Edit the silent file and Install the product in silent mode by invoking
TIBCOUniversalInstaller -silent on a console window. See Install in Silent
mode on page 50 for details.
Machine 2: Copy CONFIG_HOME directory
1. Copy the CONFIG_HOME directory to Machine 2. Ensure that the absolute
path is exactly the same on both the machines.
2. Check the scripts are located in the folder where you stored config info.
Machine 2: Run silentinstall utility
1. Navigate to the location of the silentinstall utility on a console window.