Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
Configuring BPM in Silent Mode
|
167
Configuring BPM in Silent Mode
To configure BPM in the silent mode, you must install the product in the silent
mode.
Configuring the product in silent mode requires two machines and involves the
following:
1. Running TCT in the GUI mode on machine 1 and creating the required
configuration.
2. Installing the product in silent mode on Machine 2 to generate the silentinstall
utility. Ensure that the TIBCO_HOME and CONFIG_HOME you specify on
Machine 1 and Machine 2 are exactly the same.
3. Coping the configuration from machine 1 to Machine2
4. Running the silentinstall utility to complete the configuration on Machine 2.
Ensure that you meet the following criteria when preparing to perform a silent
install and config: (In other words, when you are performing the install and
config on Machine 1 in GUI mode, ensure that the values you specify are those
that will be used by Machine 2.)
• The TIBCO_HOME and CONFIG_HOME directories on both the machines
must be the same.
• Specify the path of the JDBC driver on the target machine. Machine 2
• Specify the machine name of the target machine. Machine 2
• Use the TIBCO ActiveMatrix BPM database that will be used by Machine 2.
Machine 1: Install and run TCT in GUI mode
Do the following:
1. Install TIBCO ActiveMatrix BPM using the Install BPM, Administrator &
TIBCO Host profile. See Installing the Product on page 46 for details.
2. Using TIBCO Configuration Tool: