Installation guide

TIBCO ActiveMatrix BPM Installation and Configuration
Create TIBCO Host Instance Wizard Reference
|
113
Notification and Messaging Bus Server
See TIBCO Enterprise Message Service Server Requirements and Prerequisites,
page 94. If you intend to enable SSL communications, see SSL Prerequisites,
page 94.
Create
Windows
Shortcut
Indicate whether to create a shortcut named
instanceName, where instanceName is the
name you specified in the Name field, that points to
CONFIG_HOME\tibcohost\instanceName\host\bin\tibcohost.exe, to the
Windows desktop.
Default: Unchecked.
Table 12 TIBCO Host Instance Details (Cont’d)
Field Description
Table 13 TIBCO Enterprise Message Service Server
Field Description
Machine
Name Port List
A comma separated list of
machinename:port addresses for a TIBCO Enterprise
Message Service server.
Default:
machinename:port, where machinename is the machine on which TIBCO
Configuration Tool is being executed and
port is 7222.
Username A username for the TIBCO Enterprise Message Service server. The user must have
administrator privileges in the TIBCO Enterprise Message Service server. If the
user does not have administrator privileges, see Appendix A, TIBCO Enterprise
Message Service Server Configuration Required for Non-Admin Users, page 99.
Default: admin.
Password A password for the TIBCO Enterprise Message Service user.
Default: None.
TIBCO
Enterprise
Message
Service Server
is SSL Enabled
Indicate that the TIBCO Enterprise Message Service server is enabled for SSL.
When checked, the SSL Keystore Configuration fields are enabled. The TIBCO
Enterprise Message Service server usually listens on port 7243 when SSL-enabled
and you must update the value in the Machine Name Port List field before
proceeding with SSL configuration.