Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 96
Kaleidescape Installation Guide System Configuration
Figure 4-22 Installer GROUPS Page
2. To add a component to a group, find the component, then select the
group from the
ADD TO GROUP drop-down menu.
The page reloads and the component now has an amber
REMOVE FROM
GROUP
link to remove the component from the group.
3. To remove a component from a group, click the
REMOVE FROM GROUP
link. The page reloads and the component now has a drop-down menu.
When setting up multiple systems, be careful to select and add components
to the correct groups.
Assigning Bulk Loaders and Speed Readers to Groups
If importing content with a Bulk Loader or Speed Reader, assign these
components to the correct group. If these components are not in a group,
the components cannot import content into a server.
Viewing Diagnostic Information
A Kaleidescape server periodically communicates with several Kaleidescape
services. The Diagnostics page provides information to help verify that the
server is correctly configured.
Use the following procedure to view services information.
1. Select the
DIAGNOSTICS tab. See Figure 4-23.