Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 91
Kaleidescape Installation Guide System Configuration
Kaleidescape component through another component. This is called
command routing. Assigning a unique device identifier allows a
controller to communicate with multiple Kaleidescape devices with one
connection.
The only module provided by Kaleidescape that requires CPDIDs to be
set is the AMX module. Other modules communicate directly with the
player.
Note: It is NOT usually necessary to connect a server to a control system. The
server is generally used as a gateway to perform command routing to other
devices with CPDIDs.
When connecting a serial controller directly to a player or Mini System
via an RS-232 control port, communication parameters must be set to
match the serial controller.
The M300 Player has no serial port but can be controlled directly via
TCP/IP or IR, or a CPDID can be set for routing control protocol
commands from another Kaleidescape component with a serial port.
For detailed information about control protocol configuration, refer to the
Kaleidescape System Control Protocol Reference Manual at
www.kaleidescape.com/go/control-protocol.
• Set the Control Protocol Device ID to
NONE if control is linked
directly to the player.
• If command routing is used, select a number from the drop-down
menu.
4. Select the infrared (IR) code set by selecting one or more of the
checkboxes. Both the Kenwood and Toshiba options are selected by
default to provide maximum flexibility when programming an IR remote.
Click
OK .
To turn off a code set, uncheck the box and click
OK .
5. Select IR remote behavior for the paging button by clicking one of the
two radio buttons.
Note: If the paging button behavior seems reversed, select the other option.
Region Settings
Blu-ray Discs
Select the REGION tab to view the Blu-ray Disc region code of an M-Class
player. See Figure 4-20.