Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 90
Kaleidescape Installation Guide System Configuration
Figure 4-19 CONTROL Tab Settings for Players
2. Select the appropriate serial port settings for the player from the
drop-down menus. Table 3 shows server settings and default serial port
settings for players. Server control settings cannot be changed but
control software settings must match the server control settings.
3. Select the Control Protocol Device ID from the drop-down menu. The
Control Protocol Device ID (CPDID) allows indirect access to the
Table 3 Server Settings and Default Player Control Settings
Server Player
Baud Rate
115 200 19 200
Data Bits
88
Parity Bits
none none
Stop Bits
11
Flow Control
none none