Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 89
Kaleidescape Installation Guide System Configuration
With DHCP reservations, network parameters such as IP address,
subnet mask, router IP, and DNS servers are configured in one place (at
the DHCP server). If any of these parameters change, only the DHCP
server has to be modified. For most installations, the DHCP server built
into the router is perfectly adequate.
DHCP reservations are usually made using MAC addresses. The
procedure to create DHCP reservations is device-specific. Refer to the
documentation for the router or DHCP server.
If DHCP reservations are not an option, select Use the following IP
configuration and manually enter the IP Address, Subnet Mask, Default
Gateway, and DNS Servers. This information is required for interactive
BD-Live features of Blu-ray Discs to operate correctly
3. For M-Class players, select the radio button to allow or deny Internet
access through BD-Live. If not interested in chat, downloaded trailers, or
other Internet features, or have privacy concerns, select
DENY INTERNET
ACCESS
.
4. Click
OK .
Control Settings
Use the following procedure to configure control settings.
1. Select the
CONTROL tab. Figure 4-18 shows the control settings for a
server. Figure 4-19 shows the control settings for a player.
Figure 4-18 CONTROL Tab Settings for Servers