Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 88
Kaleidescape Installation Guide System Configuration
the preferred language. (The disc must contain subtitles or an overdub
soundtrack in the selected language for these options to be active.)
3. Click
OK to save settings.
Network Settings
Kaleidescape components, by default, obtain IP addresses from a DHCP
server. Use the following procedure if a static IP address must be set (used
with control systems) or to change other network parameters.
1. Select the
NETWORK tab. Information about the current network
configuration for the component is displayed. See Figure 4-17.
Figure 4-17 NETWORK Tab Settings
2. Most control systems that communicate via TCP/IP require a fixed
address for each component connected to the control system. The
safest and easiest way to do this is to create a DHCP reservation in the
router and use the default Obtain IP configuration automatically
setting.
DHCP reservations help prevent duplicate addresses from being
assigned, provide simple centralized management, and provide
automatic updates when network settings change.