Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 85
Kaleidescape Installation Guide System Configuration
Non-M-Class player optical and coaxial digital outputs are always active,
regardless of any other settings. HDMI audio is only active if the HDCP
handshake is successful. Analog stereo outputs are active for any audio
except DTS Digital Surround.
Audio from movies with any audio format is output over HDMI, optical
and coaxial cables, and the audio system must do the decoding.
Note: The movie player always outputs PCM audio when playing a CD.
2. Select the HDMI audio output preference. Select AUTO DETECT (default),
MULTICHANNEL , or STEREO . This option is used to override the
information automatically provided by the receiver via the HDMI EDID.
3. Click
OK to save settings.
Video Settings for the Movie Player and Movie Player 2
(KPLAYER-2000, KPLAYER-2500, KPLAYER-5000)
Figure 4-15 shows video configuration settings for older Kaleidescape
players.
Note: Each category of options has an amber text help link.