Installation guide
Kaleidescape Part No. 101-0105-00 Rev 3 Page 84
Kaleidescape Installation Guide System Configuration
0IRE black level refers to the EIA-770.2 video standard, which uses
0 IRE for black and is referred to as darker or enhanced black level.
The 0 IRE selection works well with most displays and processors. If this
setting produces loss of detail in dark areas of the image, try 7.5 IRE
instead.
Note: If the display has been calibrated and the black level is changed, the
display must be recalibrated for correct black and white levels.
6. Select Detail enhancement for HDMI video. Click the radio button next
to
NONE
,
LOW
(default setting)
, MEDIUM
or
FULL.
Either the movie player or video processor/scaler can add detail
enhancement (influencing how sharp the edges of scaled video appear)
to upscaled HDMI video output. If the video processor/scaler performs
detail enhancement, select
NONE
. Otherwise, select a level that matches
the type of the display.
7. Cli ck
OK
to save settings.
Audio Settings for the Mini System and 1080p Player
Figure 4-14 shows the audio configuration settings for the Mini System.
Figure 4-14 Audio Settings for the Mini System
1. Select type of preferred Audio for DVD Movies. Click the radio button
next to
DOLBY DIGITAL
(default),
DTS
or
PCM.