Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 77
Kaleidescape Installation Guide System Configuration
In BITSTREAM PASS-THROUGH mode, optical/coaxial audio outputs are
silent.
2. Configure the Number of audio channels. Select the audio capabilities
of the receiver. (Option is available only if
PLAYER DECODE is selected.)
If the audio level for movies is lower for M-Class players than the audio
level for music and there are only two speakers, set the number of audio
channels to two.
3. If using a coaxial or optical connection, select the audio formats that the
receiver supports. If the receiver connected to coaxial or optical does not
support DTS Digital Surround or Dolby Digital, these soundtracks can be
decoded by the player and stereo PCM output instead.
The Audio receiver connected to optical/coax supports option is used
when a receiver, processor or display using the coaxial or optical S/PDIF
connection has limited audio format decoding capabilities. Most modern
receivers and processors offer comprehensive audio format decoding,
and so the default option can be used. But for more limited devices,
audio can be sent as PCM stereo only, or as any format except DTS
Digital Surround.
4. Select Show advanced audio settings to override automatic information
provided via the HDMI EDID or adjust other settings. See Figure 4-10.