Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 75
Kaleidescape Installation Guide System Configuration
Figure 4-9 Audio Settings for M500 and M300 Players
Table 1 shows the output with default settings. These settings provide
maximum compatibility.
1. Configure the HDMI audio decode mode.
Player Decode Mode
Bitstream Pass-Through Mode
The audio decode mode affects all other audio settings. The decode
mode determines if the player or the receiver decodes the audio.
Audio can be sent as multichannel PCM over HDMI by default, with all
outputs enabled, or it can be passed through to HDMI with other outputs
disabled.
Table 1 Outputs with the Player Decode (Default) Audio Setting
Audio Output Format HDMI Coax/Optical Analog
CD PCM stereo PCM stereo Stereo
DVD PCM up to 5.1 channels Source bitstream Stereo
Blu-ray Disc PCM up to 5.1 channels DTS up to 5.1 channels
or PCM Stereo
Stereo