Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 71
Kaleidescape Installation Guide System Configuration
Each component must be configured individually. Players have several video
outputs which are all active simultaneously.
Use the
VIDEO tab to optimize video for each player in the system.
If a player is connected to more than one display device (either using several
video outputs from the player or a matrix switcher) video cannot be
optimized for each display device. One set of settings must be chosen for
the movie player that presents the fewest problems for all connected
displays.
Video and Audio Settings
Video Settings for M-Class Players
Figure 4-7 shows video configuration settings for M-Class players. Each
player can support 37 downstream HDCP devices.
Figure 4-7 Video Settings for the M500 and M300 Players