Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 62
Kaleidescape Installation Guide Physical Installation
Close the front panel.
Adding a Mini Disk Cartridge
Kaleidescape disk cartridges can be added at any time to increase server
storage capacity, whether the server is running or not.
Use the following procedure to add a disk cartridge to a Mini System.
1. Pull down the front panel.
2. Align the disk cartridge to the slot. The status light must be on the right
with the latch release handle closed.
3. Guide the cartridge all the way into the slot. A click sounds when the
latch is engaged. See Figure 3-15.
Figure 3-15 Mini Disk Cartridge Latch Release
4. Push on the disk cartridge to be sure the disk cartridge is completely
seated.
5. Verify that the disk cartridge status light glows blue.
6. Close the front panel.