Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 56
Kaleidescape Installation Guide Physical Installation
Power off the server and remove the disk cartridge. Contact
Kaleidescape Support for return information.
• The disk cartridge was previously installed in another server.
Removing and Adding Disk Cartridges in a 3U and 1U Server
Removing a Disk Cartridge from a 3U or 1U Server
Use the following procedure to remove a disk cartridge or blank from a 3U or
1U Server.
1. Access the front panel of the server.
3U Server – Pull down front panel.
1U Server – Tug gently on both sides of the front panel and remove.
2. Press the
EJECT button (Kaleidescape logo) on the disk cartridge. (Blank
cartridges do not have the logo on the
EJECT button).
3. Gently glide the disk cartridge out of the slot.
3U Server EJECT button
1U Server EJECT button