Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 52
Kaleidescape Installation Guide Physical Installation
3. Place the bracket and power supply over the holes and mount using a
#2 Phillips screwdriver to fasten with mounting screws until the bracket
is secure.
If mounting to drywall (hollow wall) or masonry (solid wall), drill a 3/16
in. (5 mm) hole for the screw anchors. Insert the anchors and tap with a
hammer until anchors are flush with the surface. Tighten each screw
additional turns, refer to Table 3-3 on page 50.
Disk Cartridges
Kaleidescape servers use three types of disk cartridges depending on the
server. See Figure 3-13.
0 1U and 3U Server disk cartridges
0 Mini Disk Cartridges
0 5U Server disk cartridges
Figure 3-13 Kaleidescape Disk Cartridges
To avoid electrical hazard and protect the player, use the
power supply provided with the M300 Player.
1U and 3U Server disk cartridge
Mini Disk Cartridge
5U Server disk cartridge