Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 50
Kaleidescape Installation Guide Physical Installation
a. If mounting to drywall (hollow wall), or masonry (solid wall), drill a
3/16 in. (5 mm) hole for the screw anchors. Insert the anchors and
tap with a hammer until anchors are flush with the surface.
b. Tighten each screw with additional turns to expand the anchor inside
the wall. See Table 3-3.
c. If mounting the power supply with the player, repeat steps for the
power supply bracket.
Removable Player Mounting
Use the following procedure to mount the M300 Player so that the player
can be easily removed and replaced.
1. Place the bracket over mounting holes.
2. Use a #2 Phillips screwdriver to fasten with mounting screws until the
bracket is secure.
Table 3-3 Drywall Mounting
Drywall Thickness Number of Turns
Required
3/8 inch 7 to 9 turns
1/2 inch 5 to 7 turns
5/8 inch 3 to 4 turns
3/4 inch 1 to 2 turns