Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 49
Kaleidescape Installation Guide Physical Installation
3. Slide the bracket down until the player clicks into place.
4. Fasten the bracket to the player with the retaining screw provided. Do
NOT use the screw that was removed, that screw is too short.
5. Place the player and bracket over mounting holes.
6. Check that the mounting screws are the appropriate length. Do not use
the screw anchors for wood.
7. Use a #2 Phillips screwdriver to fasten bracket with the mounting screws
until the player and bracket are secure.