Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 47
Kaleidescape Installation Guide Physical Installation
2. Find a mounting spot that allows for cable length limitations. Make
allowances for strain relief.
3. Determine if the power supply must be mounted with the player to keep
the player within the DC cable length limitation [4 feet (1.2 meters)].
Note: Do NOT lengthen the DC cable of the power supply.
4. Verify that there is adequate airflow around the player (1 in. (2.5 cm) in
front and 2 in. (5 cm) in back, minimum).
Do NOT lengthen
DC power cable
4 ft
(1.2 m)
Extend the
AC power cables
as needed
Power Supply
2 in. (5 cm) min.
clearance in the back
0.5 in. (1.3 cm) min. clearance
for side vents
1 in. (2.5 cm) min.
clearance in front