Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 42
Kaleidescape Installation Guide Physical Installation
3. Check that all lights are blue before closing the front panel.
4. Leave the server connected to the Internet for at least one hour.
5. After waiting an hour, power off the server, then restart. This power
off/on sequence installs the most recent software and activates
licensing.
The server can be powered on/off by pressing the
POWER button, or can
be rebooted remotely from the browser interface. See Configuring
System Components on page 67.
M500 Player
1. Plug the power cord into the socket labeled AC-IN on the back of the
player. Plug the other end of the cable into a grounded outlet with a high-
quality surge protector.
Do NOT operate the server with empty slots. Empty slots
compromise the cooling system. Fill any empty slots with
blank disk cartridges.
3U Server with
front panel down
1U Server with
front panel off