Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 34
Kaleidescape Installation Guide Physical Installation
8. Attach to rack in the best forward horizontal position. Be sure rack ears
are equally aligned from the front.
Connecting Components to the Network
Use the following procedures to connect components to the network.
Connect servers before connecting other components.
The two lights above the network connection indicate activity and the type of
connection.
Servers
1. Connect the Ethernet cable to the port labeled NETWORK on the back of
the server.
The left light indicates activity and is orange when a link is established.
The right light blinks green for activity on a 1U Server and blinks amber
on a 3U Server.