Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 33
Kaleidescape Installation Guide Physical Installation
4. Position the cooling duct with the flat side down and the grille facing the
front of the system.
5. Fasten the cooling duct to the Mini System with the six cooling duct
screws packaged with the system. Use a #2 Phillips screwdriver; be
careful not to overtighten the screws (2 in-lbs maximum torque).
6. Turn the Mini System right side up.
7. Align the rack ears with arrows pointing downwards. Attach rack ears to
each side of the Mini System with the rack ear screws.
Use care when handling the Mini System. The Mini System
contains fragile disk cartridges.