Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 31
Kaleidescape Installation Guide Physical Installation
3. The player serial number is not visible after the player is mounted.
Attach the extra serial number label (included in the packing box) to an
area where the number can be read.
4. Align the mounting slots with the shelf pegs, and slide the player towards
the back of the shelf until the player clicks into place.
Repeat if installing a second player.
5. Turn shelf over and attach retaining screws. Do NOT use the screws that
were removed.
6. Mount the rack on the shelf in the best forward position.
7. Adjust the rack ears so that rack ears are equally aligned from the front
of the shelf. Loosen the four side screws, adjust the rack ears and
tighten.
Serial number