Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 29
Kaleidescape Installation Guide Physical Installation
0 Replace the front panel aligning the six posts on the back of the
front panel with the six slots in the chassis and push the panel to
snap the panel into place.
b. 3U Server - Open the server front panel and push firmly on disk
cartridges to verify that pre-installed disk cartridges and blanks have
not become loose during shipment.
Kaleidescape Players
Use the following procedure to rack mount Kaleidescape players.
M500 Player and Music Player
Note: The M500 Player can also be installed on a tabletop. See Tabletop
Installation for the M500 Player on page 45.
1. Rack mount the player.
a. Tug gently on both sides of the front panel until panel comes off. Set
the panel aside.
b. Position the player in the rack and fasten to the rack by the
mounting ears with the screws provided.
Note: Player buttons can come loose or come out when the front panel is
removed. Replace button caps so that the curvature of the buttons
matches the curvature of the front cover and the icons are oriented
correctly.