Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 27
Kaleidescape Installation Guide Physical Installation
Figure 3-8 Mini System Connections
Note: The Mini System USB port is reserved.
Installing System Components
The Kaleidescape installation can be as simple as plug-and-play. Or apply
optional settings such as local time zone and parental controls, and the
system is ready to deliver movies and music. Disk cartridges can be added
to expand server capacity as needed.
Set up the Kaleidescape server before other system components. When
installing a system with multiple servers, set up all the servers before setting
up other components.
Rack Mounting Components
Servers
Use the following procedures to rack mount a Kaleidescape server.
1. Verify that the rack is strong enough to bear the combined weight of the
Kaleidescape components.
2. Position the server in the rack.
A 3U Server weighs 58 lbs (26.3 kg) with fourteen disk
cartridges installed. Use two people to lift and mount
a fully loaded 3U Server.
A 1U Server weighs 24 lbs (10.9 kg) with four disk cartridges
installed. Always use proper lifting techniques.
Network
Analog Audio
Component
Video
Composite
Video
Coaxial
Audio
S-Video
HDMI
Optical
Audio
Zone 1 Zone 2 Zone 3
RS-232
USB
Remote
IR-IN