Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 22
Kaleidescape Installation Guide Physical Installation
System Design
Before beginning the installation, determine the type of the display and
audio systems that will connect to Kaleidescape components.
Kaleidescape Systems support combinations of the following outputs:
•Video
0 High-Definition Multimedia Interface (HDMI)
0 Component
0 S-Video
0 Composite
• Audio
0 HDMI (Digital stereo or multi-channel)
0 Coaxial (Digital stereo or multi-channel)
0 Optical (Digital stereo or multi-channel)
0 Analog (Stereo)
A Gigabit network is suggested for all Kaleidescape Systems, and required if
Blu-ray movies are played in more than one room at the same time.
Kaleidescape recommends using a checklist for connections to expedite the
installation process. For a sample checklist, see Appendix D Installation
Checklist on page 161.
Table 3-1 Component Power Requirements
Component Power Consumption Maximum Current Draw
1U Server 66 W typical consumption with
four 2 TB Disk Cartridges
(86 W max)
1.0 A @ 100 V
0.42 A @ 240 V
3U Server 183 W typical consumption with
fourteen 2 TB Disk Cartridges
(205 W max)
3 A @ 100 V
1.3 A @ 240 V
Mini System 85 W typical consumption with
four 500 GB Mini Disk Cartridges
(74 W standby; 90 W max)
1.5 A @ 100V
0.63 A @ 240 V
M500 Player 36 W typical consumption
(27 W standby; 44 W max)
0.37 A @ 120 V
0.18 A @ 240 V
M300 Player 29 W typical consumption
(19 W standby; 30 W max)
0.25 A @ 120 V
0.13 A @ 240 V
Music Player 14 W typical power consumption
(14 W standby; 20 W max)
0.5 A @ 100 V
0.21 A @ 240 V