AMX DESIGN XPRESS V 1.5 - ON SITE INSTALLER GUIDE : Installation guide : Page 163

Kaleidescape Part No. 101-0105-00 Rev 3 Page 163

Kaleidescape Installation Guide Installation Checklist

Controls and Displays

 If using a control system (Crestron, AMX, etc.) to control the Kaleidescape

System, determine if the control will be done over TCP/IP, Serial RS-232, or IR.

If using control via TCP/IP, assign each Kaleidescape component a DHCP

reservation on the DHCP server. Assign and document the following for all

Kaleidescape components and the control system.

Device Serial Number CPDID IP Address MAC Address

(e.g., M500 Player 000000001234 3 192.168.1.175 00:02:1E:34:21:6A)

__________ ____________ ________ ______________ ______________



List all the display devices and audio equipment that will be connected to the

Kaleidescape System. Document the native resolution of the display devices

Players output in native format. This means the display must support both PAL

and NTSC to view content in both video standards.

Video Audio

Room Player SN Display Resolution Format Conn. Connection 4:3 Stretch

(e.g., Theater 000000001234 Runco VX-4c 1080p 16×9 HDMI HDMI No )

___________ ____________ __________ _________ _____ ________ _________ _________



If using a control system, download the latest documentation, programs and

templates from www.kaleidescape.com/support/control-systems.