Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 13
Kaleidescape Installation Guide Overview
A Mini Player Rack-Mount Shelf contains a rack-mounting kit for mounting
one or two mini players in a 19 in. rack. This shelf is available separately and
can hold either the 1080p Mini Player or the M300 Player.
Music Player
The Music Player ships in a single box with an IEC-type AC power cord and
screws for rack mounting.
Mini System
The Mini System ships with disk cartridges and blank cartridges already
installed, in a single box with the following items:
• Remote control and two AA batteries
• IEC-type AC power cord
• Rack mounting kit including cooling duct, two rack ears, and screws
for rack, duct and rack ears
• Ferrite bead for network cabling
Kaleidescape DVD Collections
DVD Collections ship in boxes containing approximately 100 DVDs.
Activating the System
The Kaleidescape System must be activated.
Until the Kaleidescape System is activated, the following reminder message
appears when playing a movie that has been imported into the system:
This message can be dismissed a limited number of times to perform video
calibration or other testing. When the number of dismissals reaches zero,
the text remains and cannot be dismissed. At this point, the customer must
activate the system to remove the activation message.
Note: Movies or albums can be played from the tray without the message
appearing. Blu-ray Discs, DVDs and CDs can also be imported before
activation.
This message disappears once activation is verified over the Internet.
Use the following procedure to activate the system.