Installation guide

Kaleidescape Part No. 101-0105-00 Rev 3 Page 12
Kaleidescape Installation Guide Overview
for the server power source; a UPS is optional. See Table 3-1 on page 22 for
a detailed list of component power consumption.
A/V Connections to the Kaleidescape Players
There are two options for installing Kaleidescape components.
• A/V closet with cables that run from player to the video display
• Same area as the display for (1) IR control, (2) disc tray access, and
(3) short HDMI cable lengths
Note: Check manufacturer specifications of cables to the A/V equipment.
Table 3-2 on page 24 lists cable length limits for optical and coaxial cables.
Unpacking and Inspection
The Kaleidescape System ships with components individually boxed. Check
the packing list to verify that all components are included in the order.
Note: Be sure to save original packaging in case anything has to be shipped.
Failure to use the original packaging for return shipments may void the
warranty.
3U Server
The 3U Server ships with disk cartridges and blank cartridges already
installed in the server. The server ships with an IEC-type AC power cord and
screws for rack mounting.
1U Server
The 1U Server ships with disk cartridges in the shipping box that must be
installed in the server. The server ships with an IEC-type AC power cord and
screws for rack mounting.
M500 Player
The M500 Player ships in a single box with an IEC-type AC power cord,
screws for rack mounting, a remote control and two AA batteries, and side
panels wrapped in a separate pouch.
M300 Player
The M300 Player ships in a single box with the following items:
• Bracket for wall mounting the mini player
• Bracket for wall mounting the mini player power supply
• Power supply and IEC-type AC power cord
• Screws and drywall anchors for wall mounting brackets
• Remote control and two AA batteries