User Guide

Using the DXP-PRO Wizard

XP-PRO v1.1 - Programmer’s Guide

To use FTP to transfer these files to the system's NetLinx Master, you'll need to know the Master's

IP Address:

1. Launch Windows Explorer and navigate to the directory where your Design XPress project is

located.

2. Locate and select every TXT file in the project folder. Be sure to select every TXT file, and

only TXT files.

3. Copy the files to clipboard memory (right-click on the selection and select Copy).

4. Launch Internet Explorer.

5. In the Address box, enter FTP://, followed by the IP Address of the Master, and press Enter.

6. Assuming the IP Address was entered correctly, and the Master is connected properly, you are

presented with a dialog prompting you to enter the User Name and Password for the Master.

 The default User Name is NetLinx.

 The default Password is password.

7. Enter the User Name and Password, and click the Log On button. Once you are logged on to

the Master, you should see directories associated with your Design XPress project.

8. Paste the copied TXT files into the root of this directory. Do not paste them into a folder or

create a new folder for them; they must reside at the root.

9. Reboot the Master.