User Guide

Using the DXP-PRO Wizard
72
DXP-PRO v1.1 - Programmer’s Guide
3. Note the IP Address and IP port values used by the NetLinx Master for communication.
4. From the TPD4 Main menu, select Transfer > Connect to open the Connect dialog (FIG. 26).
5. Click New to open the Connection Settings dialog (FIG. 26) and begin entering the connection
properties for the NetLinx Master communicating with the target touch panel.
6. Enter the Name (assigned to this connection), Transport method (for communication), IP
Address, and IP Port used for communication to the panel through the Master.
7. Click OK to return to the Connect dialog (FIG. 26).
8. Click the Connect button to begin the communication process to the target panel.
9. From the TPD4 Main menu, select Transfer > Send to Panel to open the Send to Panel dialog.
10. Select the target panel from within the listed G4 devices.
FIG. 25 Finishing a project and downloading the created Touch Panel Pages
Build Active
System icon