User Guide

Using the DXP-PRO Wizard

XP-PRO v1.1 - Programmer’s Guide

Choose Touch Panel Text Colors dialog

To select the touch panel text colors:

1. Select Text On and Text Off state colors from the top color palette.

2. Click and drag each color selection from the top color palette to the "Drag Here to Update"

section of each Text Off State or Text On State window (FIG. 14).

Input Names dialog

This dialog table (FIG. 15) allows you to label the input names of the display devices in the system;

this is done to aid the user in selecting the desired input on the finished panel.

For example, the default name for an input might be "Component 1"; this may not provide the user

with a clear understanding of what is actually connected to that input of the display device. Using

the Input Names table, you could rename this input to "DSS" so the user can then easily send the

intended input command to the display device.

 The Input Names table can also be used to simply shorten the names that are displayed

on the touch panel.

 For example, rather than displaying "HD Component YpbPr 1", you might label the

input "HD Comp 1".

 The Default Name is the reference to the touch panel that is used in the installation report

 The Display Text is the reference to the touch panel that is used in the installation report.

FIG. 14 Choose Touch Panel Buttons dialog