User Guide

Introduction

DXP-PRO v1.1 - Programmer’s Guide

The two Adobe Acrobat files included (in addition to this one) are:

 The On-Site Installer’s Guide is intended for the equipment installer.

 The User-Interface Guide describes the Touch Panel UI, and is provided as a reference

for designers, installers, and end-users.

Supported Touch Panels

G4 Touch Panels

DXP-PRO (version 1.1 or higher) supports the following AMX (G4) touch panel types:

 Modero CV7: 7" Modero Touch Panel (with video capabilities)

 MVP-7500: 7.5" Modero ViewPoint Touch Panel

 MVP-8400: 8.4" Modero ViewPoint Touch Panel

 Modero CA12: 12" Modero Touch Panel

 Modero CV12: 12" Modero Touch Panel (with video capabilities)

 Modero CA15: 15" Modero Touch Panel

 Modero CV15: 15" Modero Touch Panel (with video capabilities)

 Modero CV17: 17" Modero Touch Panel (with video capabilities)

G3 Touch Panels

Supported G3 touch panel types:

 CV6: 6" touch panel with video

 CA10: 10.4" touch panel (both NXD and NXT models)

 CV10/CG10: 10.4" touch panel with video (both NXD and NXT models)

G3 Touch Panel Considerations

The AXD/AXT CA10, CG10, and CG10 panels do not support the following devices:

 MAX Integrated Content Server

 Video Conferencing devices

 Cameras

 G4 Computer Control

 TakeNote

Select Help > Web Update to automatically check for program updates. The

program prompts you to download and install any updates that are available.

Unless otherwise specified, these panels encompass both NXD and NXT models

(when available). The nomenclature "NXD" represents the Wall Mount version and

"NXT" indicates the Table Top (tilt) model.