User Guide

On-SIte Installer Overview

DXP-PRO v1.1 - On-Site Installer’s Guide

one valid set of background images and at least on valid set of button images the

following message box will be displayed and the application terminated.

The Design XPress - Professional Application

The first step in defining the system is to run the Design XPress - Professional (DXP-PRO)

application. This Windows

based wizard should be run in the office well in advance of going

on-site. With this wizard you define the locations of all equipment, the number of user interface

devices, lighting scenes, source equipment, etc. The Design XPress - Professional Programmer’s

Guide gives a good overview of this application.

There is one important note related to the use of lighting addresses. Lighting addresses consist of

both a keypad address and button. The keypad address is the address of the keypad for the lighting

system being used and must be represented in the format for that lighting system. The formats for

the supported lighting systems are listed below:

Once the application entries are completed, the touch panel files, source code, NetLinx Studio

project file, text files (CD titles, etc.), and report file are all created.

Supported Touch Panels

G4 Touch Panels

DXP-PRO (version 1.1 or higher) supports the following AMX (G4) touch panel types:

 Modero CV7: 7" Modero Touch Panel (with video capabilities)

 MVP-7500: 7.5" Modero ViewPoint Touch Panel

 MVP-8400: 8.4" Modero ViewPoint Touch Panel

Lighting Address Formats

Lighting Controller Address Format DXP-PRO Example

AMX ALD-D48 Lighting System N/A 1 (greyed-out)

AMX Radia AXlink Device ID (1-255) 96

Clipsal C-Bus Group Address:Network Address (using a

hexadecimal value and a local network

address)

C1:00

Dynalite DynaLite area 18

Lehigh DX2 Lehigh area (valid range 1 - 16) 1

Lutron GRAFIK Eye Master 17

Lutron Homeworks Interactive Processor:Link:Keypad 1:4:9

Lutron RadioRA Keypad Address

Note: Keypad address 12 is reserved as

the Serial RadioRA interface. This

interface is a virtual keypad, and does not

contain any buttons.

LiteTouch 5000 Keypad Address

(3-digit hexadecimal value)

1AD

Tridonic DALI Tridonic group address

(valid range is 0 - 15)

Vantage Qlink Master:Keypad 1:5