Specifications

D ESIGN C ONSULTING
Electrosonic Systems, Inc. Page 4 of 11
Design Consulting DEC100167 www.electrosonic.com
3320 N. San Fernando Blvd. Beverly Hills City Hall Tel: [phone]
Burbank, CA 91504, USA Television Production AVC Systems Upgrade Fax: [phone]
the cabling or the programming and propose a resolution that will fix this issue in the
new system.
The current Shure wireless microphone systems (two channels) shall be updated to
new UR4D+ models. Liaise with the Owner regarding UHF frequency options for the
Beverly Hills geographical area and agree together on final choice.
The current Assisted Listening system – Listen Technologies LT-800 shall remain in
place.
The current Symetrix audio transformers and connections shall remain in place.
Video
The existing remote pan/tilt broadcast camera system is not part of this scope and is
independently connected to the Control room.
All current analog video rack components are to be removed. The video system shall
be replaced with an AMX Enova digital video matrix switcher and components.
Existing conduit runs and junction boxes in the room are to be reused, but current
coaxial cabling will need to be removed and replaced with shielded CAT6a cabling as
required. Coaxial tie-lines to/from the Control room shall remain in place.
The two 65” LCD displays in the room shall be replaced with updated LED-LCD
commercial grade models from Samsung. Existing wall mounting hardware shall be
reused (modified if necessary) Displays shall be connected to Enova outputs via
HDMI. Displays shall be connected for control via RS232 and control programming
added to the AMX system. Recommended model: Samsung ME65B
The LCD flat screen monitors on the Council desks shall be replaced with larger LED-
LCD models, either 16:9 or 16:10 aspect ratio with DVI or HDMI video inputs. Minimum
resolution of the new displays shall be 1366x768, but 1920x1080 is an option. An
HDMI model with built in audio is preferred, but the final choice of display shall be
made in coordination with the Owner, as these displays can be seen on the TV
broadcast cameras, so evaluation of the physical visual aspect needs to take place.
The displays need to show the same cloned feed from the Enova on each, and they
shall be connected via digital video splitters under the desk to an Enova output.
Recommended model is Samsung S19B420M – but it I appreciated that small LCD
display models change frequently, therefore final model choice shall be discussed with
the Owner at the appropriate time.
The staff desk, to the south of the room shall include Enova input points, by way of
Enova wall plates installed on the desks, to replace the current analog connection
points. Staff PC’s and/or iPads can be connected to the system at these points.
The existing DVD/VHS player shall be removed and replaced with a universal
BluRay/DVD/CD player with RS232 control. An Apple TV box shall be connected in the
rack enabling wireless iPad Airplay video in the room.